Gruff Posted January 15, 2022 Share Posted January 15, 2022 Wow, Gruff JK sure has come a long way. Been through several stages. These are just a few of the highlights. 6 1 Link to comment
fiend Posted January 15, 2022 Share Posted January 15, 2022 Such an evolution. Looks good! 1 1 Link to comment
Gruff Posted January 15, 2022 Author Share Posted January 15, 2022 Thanks! One more on the way 1 Link to comment
AJK Posted January 15, 2022 Share Posted January 15, 2022 I love this rig! Glad you are here Jerry! 1 1 Link to comment
Gruff Posted January 15, 2022 Author Share Posted January 15, 2022 Thanks! Glad to be here! 1 Link to comment
Jetlau3 Posted January 15, 2022 Share Posted January 15, 2022 have always loved your build. Thanks for the fenders! Few more dents now but still holding strong 1 1 Link to comment
Jdofmemi Posted January 15, 2022 Share Posted January 15, 2022 Nice Jerry! Wasn't Gruff cute when he was little Glad to see him grown up. 1 1 Link to comment
JKBrick Posted January 15, 2022 Share Posted January 15, 2022 I met you at 3.0 but those half doors are the shit 1 1 Link to comment
wjtstudios Posted January 16, 2022 Share Posted January 16, 2022 So when are we going to see some pictures of the progress?? 1 1 Link to comment
ManinBlack Posted January 16, 2022 Share Posted January 16, 2022 Still definitely one of my favorite Jeeps 1 1 Link to comment
Gruff Posted January 16, 2022 Author Share Posted January 16, 2022 Well, not as far as Jeff but it's stripped down as far as I can go before it goes into the shop this week or next. Parts are all here except for the axles. Those should be here this week. 2 Link to comment
Weebz Posted January 17, 2022 Share Posted January 17, 2022 Did you cut the storage space out Jerry? 1 Link to comment
Gruff Posted January 17, 2022 Author Share Posted January 17, 2022 Not yet. I placed it with the intention of cutting it out yesterday but it was too damn cold. 1 Link to comment
Weebz Posted January 17, 2022 Share Posted January 17, 2022 Get me good pics of whet you cut. I will let you be the tester. 1 Link to comment
Gruff Posted January 17, 2022 Author Share Posted January 17, 2022 Lol will do. Hope it gets back into the 40s 1 Link to comment
Weebz Posted January 17, 2022 Share Posted January 17, 2022 Buck up. It’s not bad once you are moving. Just don’t stop then. It hurts real bad. 2 1 Link to comment
AJK Posted January 17, 2022 Share Posted January 17, 2022 So where does thee filler house go? 1 Link to comment
Gruff Posted January 17, 2022 Author Share Posted January 17, 2022 58 minutes ago, AxK said: So where does thee filler house go? Same as stock. 1 Link to comment
wjtstudios Posted January 18, 2022 Share Posted January 18, 2022 Awesome Jerry, is that same guy going to do the work? 1 Link to comment
Gruff Posted January 18, 2022 Author Share Posted January 18, 2022 26 minutes ago, wjtstudios said: Awesome Jerry, is that same guy going to do the work? Yep, same guy. Funny, he gets as excited about doing this stuff as I do. I took one of the TMR joints down and he practically slobbered over it. 2 1 Link to comment
AJK Posted January 18, 2022 Share Posted January 18, 2022 What needs to be change to add just the rear fuel tank. I would like to get a slightly bigger tank but want to know what else this details? 1 Link to comment
Gruff Posted January 18, 2022 Author Share Posted January 18, 2022 2 minutes ago, AxK said: What needs to be change to add just the rear fuel tank. I would like to get a slightly bigger tank but want to know what else this details? If you were just going t do the tank, really the only thing I think you'd have to do is change your sway bar out to the Currie one from Genright. They make special arms for it. The tank has a recess that the torsion bar runs in. Also exhaust, but you're already dumping ahead of the axle right? If so you're set. They have 3 tank sizes: 20, 26, and 35 or 36. I went with the 20 for clearance. Pricing, like everything Genright, is retarded. But their stuff is soooo nice. 2 Link to comment
Weebz Posted January 18, 2022 Share Posted January 18, 2022 Also you can look at the Motobilt tanks. They make a tank relocation kit for stock frames and set ups. Just another option. Link to comment
Gruff Posted January 18, 2022 Author Share Posted January 18, 2022 I was actually going to see if they had one for stock frame. Good to know. Probably way cheaper too Link to comment
wjtstudios Posted January 18, 2022 Share Posted January 18, 2022 33 minutes ago, Gruff said: Yep, same guy. Funny, he gets as excited about doing this stuff as I do. I took one of the TMR joints down and he practically slobbered over it. I bet, it’s not your typical everyday project for him Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now