AJK's 17 Rubi

[Jdofmemi]

Like a whole new rig with half doors!

 

Are you going to leave them raw? It's a pretty good look. 

[AJK]

3 hours ago, Jdofmemi said:

Like a whole new rig with half doors!

 

Are you going to leave them raw? It's a pretty good look. 

Na, gonna paint them black. Also got the front cross bar and 4 point harness.

[Weebz]

Looks good.  Not gonna lie, like the raw look

[Jetlau3]

14 hours ago, AJK said:

Na, gonna paint them black. Also got the front cross bar and 4 point harness.

Think they will look sweet paint matched. 

[AJK]

So @Ricky Bobbycame up with a great tool holder. This mold is for a Milwaukee pack out and once you set your tools in how you like, he pours a liqued mix that will make a hard foam tray to organize your tools. This is one of 4 or 5 trays.

 

So, I got this new Tekton set of sockets and wondering if I really need the deep sockets. Its a 10- 32mm and 3/8 to 1 5/16 set of shallow and deeps.

 

 

[AJK]

Also the Genright mirrors I found on Amazon for 1/2 the price and come in a few different sizes.

 

Scosche PSM21008-175 BaseClamp 5” Round Convex Mirror Base Pair with Two 1.75” Tube Clamps for ATV's UTV's and Side x Sides https://a.co/d/2EOYH0x

 

 

[Weebz]

18 hours ago, AJK said:

So @Ricky Bobbycame up with a great tool holder. This mold is for a Milwaukee pack out and once you set your tools in how you like, he pours a liqued mix that will make a hard foam tray to organize your tools. This is one of 4 or 5 trays.

 

So, I got this new Tekton set of sockets and wondering if I really need the deep sockets. Its a 10- 32mm and 3/8 to 1 5/16 set of shallow and deeps.

 

 

Who does this or how do I do this?   I am looking at my tools and various bags and want one simple pack out box vs 4 bags.  

[AJK]

34 minutes ago, Weebz said:

Who does this or how do I do this?   I am looking at my tools and various bags and want one simple pack out box vs 4 bags.  

I honestly can't answer that question now but Jeff did it with his pack out and it's pretty badass none of the tools rattle and he's got four or five trays of just organized tools which he could pull out of the pack individually. 

 

I did find this.

 

https://kaizeninserts.com/products/lift-out-layers-milwaukee-packout-48-22-8424

 

They are pre-cut foam shelves for the Milwaukee and pretty much any pack out out there.

 

[Weebz]

I’ll check it out.  Thanks. 

[KevinG]

Nice find on the mirrors!  I love mine.

[SUFA5160]

On 4/28/2023 at 11:01 PM, AJK said:

Finally getting some time to finish up jeep.

Looks nice. I agree with black. 
if anyone comes around the factory JL half doors let me know please!!!!

[Jdofmemi]

20 minutes ago, SUFA5160 said:

Looks nice. I agree with black. 
if anyone comes with the factory JL half doors let me know please!!!!

I see them from time to time. 

 

Next time I will pass it on to you. 

 

And, black will look good. 

[SUFA5160]

13 hours ago, Jdofmemi said:

I see them from time to time. 

 

Next time I will pass it on to you. 

 

And, black will look good. 

What people ask for them? 

[Jdofmemi]

12 hours ago, SUFA5160 said:

What people ask for them? 

Usually see them between $2K and $4K

[Nice Little Jeep]

On 5/1/2023 at 12:13 PM, AJK said:

I honestly can't answer that question now but Jeff did it with his pack out and it's pretty badass none of the tools rattle and he's got four or five trays of just organized tools which he could pull out of the pack individually. 

 

I did find this.

 

https://kaizeninserts.com/products/lift-out-layers-milwaukee-packout-48-22-8424

 

They are pre-cut foam shelves for the Milwaukee and pretty much any pack outout there.

 

I use one of the Milwaukee pack out. The one with the handle works real nice with my set up right next to the Cabela’s toilet.

[AJK]

Doors painted. Need to wetsand to smooth out. Though about going gloss but figured I would just match all the armor.

 

4 points in....dont know if I like the 4.3....seems bulky... might swap to the 4.2.

[Weebz]

I tried the 4.2 that I just installed and like my 4.3 better.  May have something to do with how the seats too but I may also just be used to the 4.3

[AJK]

On 5/8/2023 at 7:16 PM, Weebz said:

I tried the 4.2 that I just installed and like my 4.3 better.  May have something to do with how the seats too but I may also just be used to the 4.3

Yeah, I swapped out to 4.2 and they seem to small. I'm fat so 4.3 it is.

[Jdofmemi]

2 hours ago, AJK said:

Doors painted. Need to wetsand to smooth out. Though about going gloss but figured I would just match all the armor.

 

4 points in....dont know if I like the 4.3....seems bulky... might swap to the 4.2.

Looks good Alan

[AJK]

Another fail for the UD60s. Broken pass upper and lower rear driver brackets. Yay!!!

[Jdofmemi]

Damn Alan!

 

It's a wonder that your axle didn't leave you worse off than mine did. 

[Dave]

You'd better get that GR rolling frame on order right away.

[AJK]

14 hours ago, Dave said:

You'd better get that GR rolling frame on order right away.

Lol not happening.  Too long of a wait.

 

She's fixed temporarily until I decided on which 3/4 link I am going with.

 

 

[AJK]

Well got something done today with a 4x6x10 and a few bolts,,,,,boom new door hangers.

[fiend]

17 hours ago, AJK said:

Well got something done today with a 4x6x10 and a few bolts,,,,,boom new door hangers.

Looks good. I need to do something like that.  But first I gotta get the garage organized.  Still full of partially unpacked boxes and half finished carpentry projects.