Jdofmemi Posted July 2, 2023 Share Posted July 2, 2023 22 hours ago, AJK said: Well got something done today with a 4x6x10 and a few bolts,,,,,boom new door hangers. That's nice. The extra thickness of the board lets the doors lay flat against the wall. I just put the eyebolts in the studs, so the doors stick out at an angle. I like yours better 1 Link to comment
Jdofmemi Posted July 3, 2023 Share Posted July 3, 2023 Fuel for the fire. A complete frame is about $1000 If I was in your shoes, I would buy one, and build a GenRight Elite in my spare time, then swap it and sell my existing roller chassis. https://www.ebay.com/itm/293597830982?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9rNk5745THi&sssrc=4429486&ssuid=DZ1HW7c0SN6&var=&widget_ver=artemis&media=COPY 1 1 Link to comment
AJK Posted July 3, 2023 Author Share Posted July 3, 2023 55 minutes ago, Jdofmemi said: Fuel for the fire. A complete frame is about $1000 If I was in your shoes, I would buy one, and build a GenRight Elite in my spare time, then swap it and sell my existing roller chassis. https://www.ebay.com/itm/293597830982?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9rNk5745THi&sssrc=4429486&ssuid=DZ1HW7c0SN6&var=&widget_ver=artemis&media=COPY Nice find. If I did that I would probably go TJ to LJ or LJ over a JK. At the end of the day they all cost about the same. 2 Link to comment
Jdofmemi Posted July 4, 2023 Share Posted July 4, 2023 9 hours ago, AJK said: Nice find. If I did that I would probably go TJ to LJ or LJ over a JK. At the end of the day they all cost about the same. They do, but ... you could build a frame and swap it with your existing Jeep then sell the roller to offset more than half of the build cost. Good opportunity for a V-8 swap too. Link to comment
Weebz Posted July 6, 2023 Share Posted July 6, 2023 On 6/30/2023 at 10:27 PM, AJK said: Well got something done today with a 4x6x10 and a few bolts,,,,,boom new door hangers. I bought those bolt up hanging door hinge brackets. I frankly like your set up better 1 Link to comment
AJK Posted July 9, 2023 Author Share Posted July 9, 2023 Small upgrade, GR aluminum cargo rack. 3 Link to comment
Weebz Posted July 9, 2023 Share Posted July 9, 2023 Nice. Any reason on the aluminum vs steel other than weight. Link to comment
AJK Posted July 9, 2023 Author Share Posted July 9, 2023 2 hours ago, Weebz said: Nice. Any reason on the aluminum vs steel other than weight. Weight lol. Link to comment
KevinG Posted July 10, 2023 Share Posted July 10, 2023 18 hours ago, AJK said: Weight lol. 21 hours ago, Weebz said: Nice. Any reason on the aluminum vs steel other than weight. Shiny... 1 Link to comment
AJK Posted July 10, 2023 Author Share Posted July 10, 2023 46 minutes ago, KevinG said: Shiny... I am considering stripping all the paint off my GR stuff and running it all aluminum. Will be alot of work. Link to comment
KevinG Posted July 10, 2023 Share Posted July 10, 2023 Ha ha. I got a head start on my fenders and bumper in Colorado. 3 Link to comment
AJK Posted July 16, 2023 Author Share Posted July 16, 2023 Well this hurt. I cut it off today and going to weld in a 3x3 cross beam and slap the GR rear bumper on her. 1 Link to comment
fiend Posted July 17, 2023 Share Posted July 17, 2023 On 7/9/2023 at 12:03 PM, AJK said: Small upgrade, GR aluminum cargo rack. Rack 3.0? Link to comment
fiend Posted July 17, 2023 Share Posted July 17, 2023 15 hours ago, AJK said: Well this hurt. I cut it off today and going to weld in a 3x3 cross beam and slap the GR rear bumper on her. Oof. I know you said Dishpan, but where exactly? also, wasn’t it hot as hades out there? Link to comment
Weebz Posted July 17, 2023 Share Posted July 17, 2023 Ouch. You know you have done fucked up right? Gonna have to sell that broken ass junk now and just buy a buggy. Lmao Link to comment
AJK Posted July 17, 2023 Author Share Posted July 17, 2023 1 hour ago, Weebz said: Ouch. You know you have done fucked up right? Gonna have to sell that broken ass junk now and just buy a buggy. Lmao Looks like I have no choice. Link to comment
AJK Posted July 17, 2023 Author Share Posted July 17, 2023 1 hour ago, fiend said: Oof. I know you said Dishpan, but where exactly? also, wasn’t it hot as hades out there? That stupid boulder to the right just before the gatekeeper. I got high centered and it spun me 90 degrees so I just laid into it to get off the rock . It wasn't bad heat wise like 75-80. As soon as we hit the bottom of the mountain it was 105. Link to comment
AJK Posted July 23, 2023 Author Share Posted July 23, 2023 New cross beam made. Made like the factory just way stronger and absolutely perfect fit for the GR bumper. 3 Link to comment
Jetlau3 Posted July 23, 2023 Share Posted July 23, 2023 Damn this is sick . Nice work . Link to comment
KevinG Posted July 24, 2023 Share Posted July 24, 2023 Looks great! Nice job on the crossmember. BTW the rash guard is a worthy add to it. I drug mine going up something at some point and the middle got pulled out a bit. Edit: I mean the middle section of the bumper where the cutout for the tow package got pulled out a bit before I put the rash guard on. I drug it a few times in CO after the rash guard was on and all seemed fine. 1 Link to comment
AJK Posted July 25, 2023 Author Share Posted July 25, 2023 4 hours ago, KevinG said: Looks great! Nice job on the crossmember. BTW the rash guard is a worthy add to it. I drug mine going up something at some point and the middle got pulled out a bit. Edit: I mean the middle section of the bumper where the cutout for the tow package got pulled out a bit before I put the rash guard on. I drug it a few times in CO after the rash guard was on and all seemed fine. Yeah I plan on getting them soon, good to know they are worth it. I assume you have to drill some holes? Also, got a wild hair up my ass and filled in the Evo logo on the kickplates and cut out the Evo design on the inner fenders. Nothing against them just like the slicker look of no logos. Next I think im going to fill the slider logos in, iDK for sure yet. 1 Link to comment
KevinG Posted July 25, 2023 Share Posted July 25, 2023 49 minutes ago, AJK said: Yeah I plan on getting them soon, good to know they are worth it. I assume you have to drill some holes? Also, got a wild hair up my ass and filled in the Evo logo on the kickplates and cut out the Evo design on the inner fenders. Nothing against them just like the slicker look of no logos. Next I think im going to fill the slider logos in, iDK for sure yet. Yep. Just a few holes. You're going to laugh when you pull them out of the box. I think they might be heavier than the bumper. Link to comment
AJK Posted July 25, 2023 Author Share Posted July 25, 2023 It's 3/16 angle iron for $220 bucks WOW. The replacement cross beam I replaced was $400 from Jeep and $299 for a aftermarket one. I got a 5 foot 3/16 3x3 square tube for $38 bucks a the steel stop. I bet a piece of 3/16 angle Iron in $20. A few cuts and holes and you will never know the difference. I love Genright but 8 pound baby Jesus they ask a lot for some of their shit. 1 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now